Tips on Caring for Your Car Color Black

Black seems to be the favorite color for some circles modifier. A typical dark color is a lot to be carried modifier changed course so much racing car.

However, do you know if you care for the black color car should be carefully considered. Not to pledge a dull black color and unappealing to the eye.

Here are some step that should be noted:

1. Material or materials to wash the paint surface. Try to wash the body of the car using a soft cloth and wherever possible avoid using harsh ingredients. Because the smooth material has high water absorption. Car wash with a soft cloth will help reduce the impact of car body that seemed to scratch when out in the sun.

2. Note also the liquid used to wash the surface of your car. As much as possible choose a liquid which is dedicated to caring for black paint. Do not let the wrong choice, because in its application is very different from the other colors. The most common possibilities if you wash the car with fluid material for other colors can actually cause fading black color of your favorite car.

3. The most important step is, do regular maintenance. Sometimes to do the wax in the span of three months on a regular basis. It's very important, because, it is able to maintain the level of care that was conceived by the color black. By doing regular maintenance, your favorite black car looks will always fascinate. 

Accu Care Tips

The use of private vehicles, sometimes forgotten by the proponents of this one.

Accu (battery), this is one of the important components in a motor vehicle, whether it's two-wheel or four-wheel drive. Often users forget to take care of the vehicle one of the components, here we provide some tips on how to care for the batteries to keep it in prime condition.

The easiest treatment is to measure the voltage of the existing voltage at the batteries, if the voltage is reduced from normal, it's good for immediate service in stores charging rechargeable batteries.
 
Additionally, if you use wet batteries routine in check moisture content in it. It aims to anticipate the reduction in water batteries abruptly.

If your batteries run out of water, a problem that you will face is damaged or worn components. It stretcher because existing cell in the inner layer is not working properly. If you are using dry batteries, no need to worry about the water batteries.

In the polar polar batteries, should still be considered. This is often forgotten considered by the owner of the vehicle. Avoid the formation of rust on both ends of the poles batteries. Moreover, to cause the acid to the polar polar crust.

To anticipate, the two poles sandpaper using fine sandpaper. And do not forget to put the batteries with the correct position on the stand. Due to the lack of proper position can damage the batteries and other components.

To be aware of if you're filling less water batteries, avoid direct contact with the water batteries. Because of acid from the batteries can burn clothing and be able to harm the skin if exposed to splashes.

In general, the age of the batteries ranging up to 4 (four) years. But if you want your batteries in prime condition, do not forget to check out every month in order to prolong its life span. 

Want Accu Jumper, This is his trick

Some tips for caring for your batteries to keep it in top shape. Although that case, can not be denied when you strike sudden batteries or crashed. Well, it can be solved by jumper your batteries are worn out with the help of batteries still in prime condition.

However, in its application is not limited to the accu jumper cable connecting the batteries are worn out with the good ones. There are several things that must be considered in jumper the car batteries. Here we provide tips jumper batteries safely in your car.

First, the capacity should be the same voltage. That is, if the voltage capacity of 12 Volt batteries are defective, you have to prepare one of the prime batteries with the same voltage. After that, set very close range so that the jumper cable that connects the two batteries can connect properly.

It is important to note because if the batteries do one jumper cables apart, can lead to a huge misunderstanding. In doing jumper the batteries, observe all the features that uses electrical current to be switched off. Devices such as Air Conditioning, headlights, as well as audio, compulsory you turn off the jumper state batteries.

If you've followed the steps above, the next step is to establish the connection cable between the batteries with a good soak.

The trick is charged by connecting the positive cable (usually red) from the batteries to the battery is a nice soak in the head is positively charged batteries.

Then, for the black cable (negative charge) connect the head negatively charged batteries in good batteries, while the other end of the cable that you can connect it to the car frame that has a worn out batteries.

After the cable is in good order and properly, then the starter was the one car that has good batteries first.

If it is in the idle position, wait 5 minutes, it is useful to recharge the batteries voltage is primed to be ready to make an injection stun soak into the batteries. After that, begin to download the car starter batteries that have worn out by way slowly.

If from the jumper still can not jumper, check the cables before you connect the cable. Do not be forced to download the car starter when the power required is not qualified.

It is feared could cause short circuit soak batteries in cars. Of some of these tips, hopefully to help you in an emergency. 

Tips on Caring for Your Car Color Black

Black seems to be the favorite color for some circles modifier. A typical dark color is a lot to be carried modifier changed course so much racing car.

However, do you know if you care for the black car should be carefully considered. Do not let the black mainstay become dull and unattractive to look at. Here are some step by step that should be noted:

1. Material or materials to wash the paint surface. Try to wash the body of the car using a soft cloth and wherever possible avoid using harsh ingredients. Because the smooth material has high water absorption. Car wash with a soft cloth will help reduce the impact of car body that seemed to scratch when out in the sun.

2. Note also the liquid used to wash the surface of your car. As much as possible choose a liquid which is dedicated to caring for black paint. Do not let the wrong choice, because in its application is very different from the other colors. The most common possibilities if you wash the car with fluid material for other colors can actually cause fading black color of your favorite car.

3. The most important step is, do regular maintenance. Sometimes to do the wax in the span of three months on a regular basis. It's very important, because, it is able to maintain the level of care that was conceived by the color black. By doing regular maintenance, your favorite black car looks will always fascinate.

Want your car cabin-style Racing, It's Her Tips!!!

Cabin interior or exterior appearance is a reflection of a car. However, the cabin basically have their own nuances as it concerns the style of the rider.

For those of you who are young and like to drive in high adrenalin shades, cabin modify the style of racing so the choice is clear. Then how easy tips that can aura racing look of the cabin,
the following tips:

Early stage if you are interested in modifying the cabin with racing-style homage to make sure that other elements such as elegant or VIP was not there.

Characteristics cabin racing as we know most of the interior is not as luxurious as wearing accessories made DAD Garson output, or also the seat with leather coating. Cabin racing is always identical with components made ​​from carbon fiber and also borders thick-borders.

The most visible components of the cabin is the racing style steering wheel replacement. Some model racing steering wheel that many in the market as output Momo steering wheel, Isotta, Personal, Raid, nor is Victor.

After that we also we also need to replace the seat with racing models. Model racing seat that we should select a seat belt is equipped with 4 point racing minimal models.

Components in the dashboard we can also give a touch of racing as a replacement speedometer, tachometer additions, and also replacement shift knob models.

Parts-parts will also be aggressive using parts made ​​from acrylic or given a carbon layer. Subsequent to coating the floor, we can choose to use minimal material borders or carpet racing.

Furthermore, if you want a cabin racing look more leverage then the audio device should be designed minimalist or even eliminated. Because the riders are racing the cabin look likely drove his car in the high rpm, so the placement of the audio in the cabin considered driving may cause distraction.

The latter, choose a solid match natural color if you want the flow of racing. It is advisable not to choose colors that blend so classy.

How to Add a New Audio Devices in the Car

Talking about the audio system in the car, this device is not the main thing. However application audio is becoming important because it serves to be a means of information and entertainment as well as driving.

If the condition of your car audio system is to adopt a standard, then you intend to replace or modify the audio device,
The following are the tips for you:

The first thing you must do is, you can customize your character enjoy doing music genre. Because every genre of music typically have different levels of concerns equalizer. If you like hip-hop rhythms with the sound, you can select audio system that puts the quality of his bass voice.

Choose from brands that already have good quality. Note also the rear part of the trunk of your car, so the subwoofer to be placed trunk can be well ordered. Regarding the choice of inputs, it is also a key thing to be aware of.

Currently have mushroomed offering some brand head unit with inputs ranging from CD, DVD, USB to iPhone / iPod slot.

Should choose a device that has a standard, not to exceed the power capacity of the original, unless you've done a little change in those sections.

Do not forget to pay attention to passive crossover which is included in the speaker. This component is one important part of the speaker components, where the function of the passive crossover to separate the frequency of the tweeter and woofer / midbass, midbass and tweeter so it does not have to work too hard to be able to generate sound according to function. With a good passive crossover it will produce clearer sound and more efisient.

How to Choose Window Film for Cars

In choosing a window film, vehicle owners are usually rather difficult to determine the choice. Brand is increasingly widespread, plus the increasingly competitive prices also sometimes be the reason for choosing a product.

But in its application, reject feature UltraViolet rays (UV) and Infrared (IR) that should be the benchmark in the election. Therefore, these rays can fade the color is believed to layer your car interior.

In addition, the ability to resist heat, it makes no disturbed performance car air conditioner with heat that is inside the cabin.

Consider Visible Light Transmittance (VLT) that exist in the film, the feature film is the ability to reduce the effects of glare from the incoming light.

And today is the development of better technology with Dual presented his VLT. That way this film is able to adjust the intensity of incoming light. When the blazing noon is at 40 percent, while if the night is 20 percent.

As a preventive langah, avoid as much as possible the use of one-way window film (which is like a mirror). Because the window film with a model like this one from the outside can not see you who was in the car.

It is feared if you need some help, but other people can not see the state of your car.

As well as the latter is, choose based on quality. Film-quality glass is not necessarily expensive. If your budget is limited, you can choose a cheaper provided it's not cheap.

You may have to sacrifice one or several functions, but is able to offer quality auto glass embedded in the long term, no chipped or discolored. Make sure your film choice was based on the needs you want.

Tips for Installing a GPS device in your car

Installation of GPS or Global Positioning System is of increasing help drivers when through the roads that have not been passed. However there are small errors that often occur in the installation of the GPS because it can be installed practically makes installation often less precise dashboard section. It never hurts to pay attention to the following tips in the process of installing GPS in your four-wheeled vehicles.

The first step is to look big or small screen of the GPS itself, if it has a 5-inch wide screen, it's good to put the tool center dashboard center section. It is intended that these modern devices do not interfere with your vision when driving. In addition, a large screen with a 5 inch can be seen well by you.

The second thing you may notice is if the screen has a 3.5-inch wide, attach the device with approximately the distance can be reached by your hand. As much as possible do not install the device on your windshield. Why? That can interfere with your vision to see the position of your right. As a solution, you can install it on top of the dashboard.

The position is much better when compared with sticking your front dikaca. In addition, even when you're driving you can still operate the GPS with your left hand without having to disturb the performance of your right hand. That's the tips that you can practice if you dilemma to choose the position of the GPS in your car.

10 Features Advanced Technology in Cars

In driving a car, especially when I travel a lot or are stuck in traffic, would require the rider and passenger entertainment be it listening to songs or other things that can relieve fatigue. Automobile As reported, there were 10 high-tech features that are needed by the driver or passengers. Some already exist in Indonesia, partly on the car manufacturer's global output.
 
1. Bluetooth
This device is needed by every rider. Especially the driver or passengers are listening to a song, pick up the phone in the car and other things.

2. USB port
In addition to Bluetooth connectivity, a USB port is also very useful, especially if the driver and passengers to listen to the song. This device is much more simple than the bluetooth connectivity, because if you want to listen to simply enter the flash disc that has been filled with a wide selection of songs.
Voice Commands
 
3. These devices typically found in existing Ford Ford Sync technology brings.
This feature makes the rider and passenger utility if you want to listen to and receive calls.
If you want to do it enough to say what the song title or the name of the person we will call. With a record of the spoken name must match the name that is listed in the phone book us.

4. In-Dash Media Streaming
This device can also be found on the existing Ford Ford Sync technology brings.
This feature will make you particularly want to listen to the songs on the phone without having to turn on bluetooth first. Listen to the song on the internet was so easy.

5. This feature makes the motorist as a fighter pilot.
With this feature, the next screen will turn into a special screen release information about audio, bluetooth, GPS temperature and speed.
Certainly the numbers made ​​transparent so it does not interfere with the view to the front.

6. BMW iDrive
This feature is only available in some of the latest BMW cars. BMW iDrive is sebiuah concept that combines the functions of a touch pad and joyctick to ensure high control flexibility.
 
7. OnStar
Feature to find out where the location of restaurants, telephone number, workshops and several entertainment areas in your respective country.
The advantage, this feature can mensimpan data much more and can update new places around you. Available in new cars Chevrolet output.

8. Camera
The device is already being used in some cars.
These cameras are often mounted on the front and rear of the car that its use can make it easier when doing parking.
You are so much easier to park the car with the help of this camera.

9. GPS
If you do not have a fancy LCD screen and can not buy the OnStar then one solution that is GPS.
With this device you can easily know the road not find or know about.

10. In-Dash Restaurant Recommendation
If you do not have a fancy LCD screen and can not buy the OnStar then one solution that is GPS.
With this device you can easily know the road not find or know about.

How to Take Care of GT Radial Tyres

Tires is one of the most important parts in a vehicle, yes because this part is the only part of the vehicle directly in contact with the road. Knowing the importance of the function of the tire in a vehicle, as users we should more carefully to the part of this one, because it is also directly related to your safety while driving. 

 Tires also proved to have specific ways to care issues, to maintain the condition of your tires to stay fit, here are a few tips from the GT Radial tires to take care of your vehicle.

First tip is choose the type of tires to suit your driving style when buying tires. For this one you can ask for advice directly to the seller who understands the tires of course. And do not forget to make sure the tire size used in accordance with the size and the index of the recommended tires for the vehicle you use.

Second check your tire pressure, at least once a month. Less wind pressure is dangerous because it can cause fatal damage to the tire, even bent wheels are also more vulnerable if hit a hole in a state of the flat tire. While excessive pressure will cause uneven damaged tire on the surface, and it will be very influential at the time of vehicle control and braking.

Third you need to rotate your vehicle's tires. The rotation itself is intended to prevent damage to the uneven surface of the tire and also to extend the service life of tires. There are two tire rotation system, the first system done or diagonal line. For diagonal way, to be considered is the direction replacement, swap the front wheels with the rear left-right, and the right front tire to the left rear tire.

Furthermore, the replacement of a line, where the right front wheel to move exchanged with the left front wheel and the right rear tire to the left rear tire. Perform rotation on your tires every 7,500 to 10,000 miles.

Fourth is doing balancing and spooring. Tires need balancing to prevent shocks and vibrations that occur while driving, as well as the damage is not evenly distributed. Balancing itself is usually done on every new tire replacement, tire rotation, or if the tire vibrate when it reaches a certain speed.

Spooring also need to be done periodically to ensure the safety and comfort while driving. Spooring usually done during a tire rotation or in the event of symptoms such as car pulls to the right or left when driving.

The last tip is a new replacement tires. At each tire has been fitted with TWI (Tread Wear Indicator) on the vehicle tire tread groove. If the tread has touched the TWI, it shows it was time to replace the tire. TWI layout itself is usually indicated by a small triangle mark on the tire wall.

That was some way of maintenance your vehicle tires. Hopefully the tips above could benefit you all and make your driving activities become more secure, convenient and enjoyable.

How to Clean Glass Films of Car in Rainy Season

In addition you have to maintain the condition of the vehicle's engine to avoid breaking down when exposed to water, you also have to be smart to take care of the other parts of your vehicle.  

Window film one of them, even if it seems trivial and does not require special care, the reality is window film should be treated specifically in order to maintain condition. Just imagine if you are not awake window film, window film damaged condition will certainly disrupt your visibility when driving and can result in fatal accidents. Here are some how to care for your car window film:

1. The very first thing you should do to take care of window film when the rainy season, is to clean it of impurities caused by splashing rain. You simply rinse with clean water being pressurized so that the dirt can perch disappeared. Avoid using fabric while trying to remove impurities that settle, because it might damage the glass coating that makes the film scratchy. 
2. Avoid using any chemical liquid brand. Because according Hans the use of liquid chemicals but instead of treating glass film damaging elements that exist on the window film. Usually window film that is often exposed to the fluid chemistry will be easier to peel and will also cause a rainbow effect on glass film. 
3. Avoid using cleaning glass fabric in the film, because the fabric will usually make in materials accumulate dirt, and is not good if in direct contact with the window film that makes it easily scratched. As a solution you can use tissue previously been moistened with clean water that is more friendly to the glass coating film. 
4. Do not let dirt too long perch on window film, because if too often can accelerate the emergence of the fungus in the window film. According Hans you simply rinse it with fresh water if you do not have much time to clean your window film. 
5. The latter you must also consider the existing rubber part on your vehicle window. Because this place a lot of dirt that is on a very potentially damaging coating film glass windshield while being hung upside down.

It was a few tips regarding the maintenance of window film in the rainy season. Hopefully these tips can be useful for you all, and be diligent to clean the window film that the visibility of your vehicle in your drive to stay awake and remain safe while driving.